BLITZ Mini F7 Stack (Mini F7 V1.1 + 55A 4in1 ESC)

PRODUCT DESCRIPTION
FC // BLITZ Mini F7 V1.1 Flight Controller
Top Features:

• - IMPROVED CIRCUIT DESIGN, BETTER COMPONENTS AND LOWER ELECTRICAL NOISE!
• - DJI HD VTX CONNECTOR (PLUG-AND-PLAY / NO SOLDERING REQUIRED)
• - FC INDICATOR LEDS FOR VISUAL DEBUGGING

• - 2022/FEB: VERSION UPDATED TO V1.1 / GYRO CHANGED TO BOSCH BMI270 DUE TO AVAILABILITY & PRICE ISSUES WITH MPU6000.

• MCU: STM32 F722
• GYRO: BMI270
• BAROMETER: DPS310
• OSD CHIP: AT7456
• FLASH: 16MB (BLACKBOX FLASH)
• UARTS: 6
• MOTOR OUTPUTS: 4X (SH1.0 CONNECTOR)
• I2C SERIAL: SDA / SLA PADS
• SMARTAUDIO / IRC TRAMP VTX PROTOCOL SUPPORTED
• LED CONTROLLER: YES
• BEEPER PAD: YES
• FIRMWARE TARGET: IFRC-IFLIGHT_BLITZ_F722
• MOUNT PATTERN: 20X20 MM / 4MM PCB HOLE DIAMETER, SILICON GROMMETS FOR M3 SCREWS
• DIMENSIONS: 30.5X27 MM
• WEIGHT: 5G

• - UART 1 FOR VTX HD / ANALOG
• - UART 2 FOR A RECEIVER
• - UART 3/4/5 FOR GPS OR OTHER SENSORS THAT REQUIRE A SERIAL PORT
• - UART 6 FOR ESC TELEMETRY

• 1. F722 MCU HAS AN INNER INVERTER.
• 2. SBUS, CRSF, ELRS, IBUS, DSM ETC... CAN BE CONNECTED TO ANY UNUSED UART_RX, WE SUGGEST YOU CONNECT TO UART_RX2
• 3. FRSKY SMARTPORT, TRAMP & SMARTAUDIO CAN BE CONNECTED TO ANY UNUSED UART_TX, WE SUGGEST YOU CONNECT TO UART_TX1
• 4. F.PORT CAN BE CONNECTED TO ANY UNUSED UART_TX, WE SUGGEST YOU CONNECT TO UART_TX2

• - DIMENSION: 35*42MM
• - MOUNTING HOLES: 20*20MM/Φ4MM
• - WEIGHT: 11.3G
• - SUPPORTS 2-6S LIPO INPUT
• - MCU： G071
• - CONSTANT: 55 AMPS
• - BURST: 60 AMPS
• - CURRENT SENSOR: YES
• - BEC: NO
• - CURRENT RATE: 100
• - SUPPORTS: DSHOT DSHOT150/300/600/MULTISHOT/ ONESHOT ETC.
• - FIRMWARE: BLHELI 32
• - TARGET: IFLIGHT_BLITZ_G1

• - 1pc x BLITZ Mini F7 V1.1 Flight Controller
• - 1pc x BLITZ Mini E55 4-IN-1 2-6S ESC
• - 1set x silicon grommets
• - 1set x wire harness for F7 Flight controller